High frequency soldering station CHUERA-203H

High frequency soldering station CHUERA-203H

$51.64
$51.64
EXW China
SAVE $-51.64 Sold out

● Mobel:  1150D
● MOQ :  1 set
● Packing details:  
● Subject to discussion:

CSD-203H lead-free soldering station

High frequency soldering station

  1. Pre-sensor design, accurate temperature control and rapid temperature recovery.
  2. It has automatic sleep function to save energy. 
  3. Temperature locking function to ensure the welding process.
  4. Digital temperature calibration, simple and convenient operation.

Specification:

Working voltage: AC220V/50HZ AC110V/60HZ

Temperature range: 50~600℃

Maximum instantaneous power: 90W

Temperature stability (no load): ±2℃

Soldering iron resistance to ground: <2Ω

Soldering iron potential to ground: <2mV

Temperature correction method: digital correction

Weight:  About 3.23Kg

Package Size: 240*230*130MM

Carton size: 505*490*280MM

Packing specifications:  8 units/box

Available accessories: 

Handle model: LT-202 soldering pen

Heating core model: VH90 heating core

Applicable soldering iron tips: 200 series soldering iron tips

View full details

FAQ

What types of solder can be used with the CHUERA-203H soldering station?

The CHUERA-203H soldering station is compatible with both leaded and lead-free solder. It is recommended to use high-quality solder with a rosin core for best results and to ensure proper wetting and joint formation.

How can I prevent the soldering iron tip from oxidizing?

To prevent oxidation, regularly clean the tip with a damp sponge or brass wire cleaner, tin the tip with solder after each use, and store the soldering iron at an appropriate temperature when not in use.

Who should I contact for technical support or warranty claims?

For technical support or warranty claims, refer to the user manual for contact information or visit the manufacturer's website for assistance.

What should I do if the soldering iron is not heating properly?

Check that the unit is properly plugged in and turned on.
Verify that the temperature settings are correct.
Inspect the heating element and soldering tip for damage and replace if necessary.
Ensure there are no loose connections within the unit.