Waterun-606 Grounding Cord 6feet

Ensure the clip or plug is clean and free from corrosion or debris.
If the clip or plug is damaged, consider replacing it with a new one.
Make sure the connection point is clean and conductive.

Ensure all connections are secure and that the ground point is reliable.
Inspect the cord for any visible damage or wear.
Verify that the grounding point itself is properly connected to ground.

Use an ESD tester or a multimeter to check the continuity and resistance of the grounding cord. The resistance should be within the acceptable range specified by ESD standards (typically less than 1 ohm).

Step 1: Disconnect the grounding cord from all devices and ground points.
Step 2: Wipe down the cord with a soft, damp cloth to remove any dirt or debris.
Step 3: Use a mild detergent if necessary, but avoid harsh chemicals or solvents.
Step 4: Allow the cord to air dry completely before reconnecting it.